vSure 9.0: software focused on Design for Manufacturing (DFM) Analysis

vSure 9.0: software focused on Design for Manufacturing (DFM) Analysis .

 

InnoFour B.V. is proud to announce the Mentor/Valor vSure version 9.0 product, the successor of Valor Enterprise 3000 Design For Manufacturing (DFM) product. vSure will enable designers to easily perform extensive DFM analysis during the PCB design process, thus improving their productivity, avoiding costly redesigns and speeding the time to market without losing focus on quality.

 

vSure can verify more than 700 DFM manufacturing requirements on a PCB design during the development process, ensuring that the data transferred into manufacturing is ready for production engineers to perform bare board and assembly manufacturing without requiring any design changes.

 

vSure integrates with both Mentor and non-Mentor PCB design solutions by using the ODB++ data container generated from most EDA systems as the source for the DFM analysis.

 

The vSure version 9.0 release contains:

  • A Manufacturing Risk Assessment interface that enables designers to quickly review DFM analysis results focusing on the most critical problems. Potential design problems can be filtered and sorted by various categories including severity, board location, padstack types, package or part numbers and features. Each result can be quickly and easy reported back to the original EDA system by using the Graphic Sync function.
  • A Design Process Wizard to guide designers through the DFM process following a best practice sequence of steps from the import of design data to the viewing of analysis results. The wizard executes all actions in accordance with industry-tested practices to ensure a comprehensive analysis while reducing the need for a designer's detailed manufacturing expertise.
  • The DFM process is controlled by a set of analysis-rules ( the ERF files ) that are configurable based on the technology, the design center, the production processes or manufacturer's capabilities.
  • A significantly simplified user interface to improve the productivity of the designer while insuring a comprehensive DFM analysis process

InnoFour can support in the process of adopting and deploying the DFM functionality into the design process with our dedicated DFM specialist Gerard Elema. With a long history of DFM expertise Gerard Elema recently joined InnoFour and strengthened its manufacturing focus. For more information please contact g.elema@innofour.com

 

 

14th November 2017 New Release FloTHERM XT V3.1
21st August 2017 BOM Connector 7.6 Released
20th July 2017 Release of FloTHERM v12
29th August 2016 PADS VX.2 Now Available
29th February 2016 Sherlock User Forum
1st February 2016 TLA Winner 2015
4th August 2015 New PADS Solutions!
29th June 2015 UVM Framework
23rd June 2015 PCB Sketch Router
21st April 2015 HDL Designer 2015.1 Release
19th February 2015 BOM Connector™
14th December 2014 Multi-board PCB Systems Design
9th September 2014 New course: Introduction to UVM
20th May 2014 Mentor PCB Forum
18th March 2014 Xpedition VX release
3rd February 2014 DfR Solutions - Best of 2013
22nd October 2012 Dongle discontinuations
19th October 2012 PADS 9.5 Now Available!
20th April 2011 Introducing Questa Core
1st February 2011 PADS 9.3 available
22nd November 2010 Why customers choose BluePrint
30th June 2010 PADS9.2 Available
8th June 2010 5 Reasons to Adopt PLM
18th March 2010 Mentor-Valor Acquisition
15th February 2010 InnoFour goes Scandinavia
18th January 2010 PADS v9.1 available
9th October 2009 CAM350 v10.1 available
26th May 2009 Introducing PADS v9.0
2nd February 2009 CAM350-150 Bundle Introduction