Predicting Package Level Failure Modes in Multi-Layered Packages

Predicting Package Level Failure Modes in Multi-Layered Packages

written by Gil Sharon, Greg Caswell and Nathan Blattau, DfR Solutions

 

Gil Sharon and Greg Caswell got a Best in Session Award for the paper Predicting Package Level Failure Modes in Multi Layered Packages at the recent IMAPS Symposium in Orlando.


Abstract

 

Package technology is constantly improving in order to keep up with the advances in silicon technology. Multi layered packages exhibit several failure modes that can be predicted using modern software tools. This paper provides a methodology for creating a high-fidelity model of the interposer with all the conductor geometries. The two failure modes that are explored with this model are package warpage prediction due to actual copper imbalance and filled microvia delamination. Each layer can meshed based on the actual geometry in the layout design. Package warpage is caused by copper imbalance between the two sides of the interposer. The CTE mismatch between the two sides can bend the package to such a degree that it becomes impossible to assemble the solder interconnects. The filled microvias have copper structures that can delaminate from the copper traces in the conductor layers. The high-fidelity model provides the predictive tool to allow designers to adjust the layout before any manufacturing has taken place.

 

Download the PDF

 

 

 

21st August 2017 BOM Connector 7.6 Released
20th July 2017 Release of FloTHERM v12
29th August 2016 PADS VX.2 Now Available
29th February 2016 Sherlock User Forum
1st February 2016 TLA Winner 2015
4th August 2015 New PADS Solutions!
29th June 2015 UVM Framework
23rd June 2015 PCB Sketch Router
21st April 2015 HDL Designer 2015.1 Release
19th February 2015 BOM Connector™
14th December 2014 Multi-board PCB Systems Design
9th September 2014 New course: Introduction to UVM
20th May 2014 Mentor PCB Forum
18th March 2014 Xpedition VX release
3rd February 2014 DfR Solutions - Best of 2013
22nd October 2012 Dongle discontinuations
19th October 2012 PADS 9.5 Now Available!
20th April 2011 Introducing Questa Core
1st February 2011 PADS 9.3 available
22nd November 2010 Why customers choose BluePrint
30th June 2010 PADS9.2 Available
8th June 2010 5 Reasons to Adopt PLM
18th March 2010 Mentor-Valor Acquisition
15th February 2010 InnoFour goes Scandinavia
18th January 2010 PADS v9.1 available
9th October 2009 CAM350 v10.1 available
26th May 2009 Introducing PADS v9.0
2nd February 2009 CAM350-150 Bundle Introduction