FloEFD™ for Creo v17.1 released

FloEFD™ for Creo v17.1 Released

 

FloEFD™ for Creo v17.1 has been released. See beneath a summary of the new features available in this release:

 

  • Creo 4.0. Creo 4.0 is now supported.
  • Improved multicore scalability. Solver performance has been improved for multicore parallel simulations, running up to 35% faster vs 17.0 and 50% vs 16.0 (20 cores test).
  • Membrane model. The new Membrane model allows for simulation of venting membranes. The Membrane does not transmit liquid water but can transmit air and vapor. The water vapor is transported through a membrane by a concentration gradient and a gas (for example, air) is transported by a pressure-driven force (available in LED module).
  • Improved geometry handling. Improvement in the FloEFD Boolean Operations kernel (activated by the Improved geometry handling option) fixes some geometry recognition failures.
  • Damping improved. In a steady-state analysis the automatic damping of goal dependency has been improved, resulting in much faster goal convergence.
  • Scale down steady state step. In a steady-state analysis you can scale down the local time step by a specified factor. This option can be used to minimize oscillations in steady-state convergence.
  • Uniformity index goal. The uniformity index (a quantity characterizing how uniform the flow is) can now be set as a surface goal providing the full power to optimize the flow by using the uniformity index as an objective function in the Parametric Study.
  • Template folder. The storage folder for user-defined templates can now be customized by the user in the Tools, Options dialog. You can use the project template to easily copy projects to different models and CAD systems.
  • Solid Material conditions naming improved. The user customized name of the solid material condition will update the material name after changing the material if the auto generated material name was not changed by the user.
  • SAR based on goal convergence. The goal based solution-adaptive refinement invoking algorithm has been revised to allow for earlier automatic finishing.
  • Number of time steps. You can now see the number of time steps for the specified time period in the Calculation Control Options.
  • Linked Conditions from Components improvement. Improved handling of linked conditions to avoid clash of project folders.
  • Windows Job Scheduler template name. Name of Job template can be defined in the Remote solver options.
  • Free Surface parameter. The new Free Surface visualization parameter displays the level of fluid which corresponds to the volume of filled fluid in the system. This parameter can be used for easy visualization of the free surface level in multiple plots.
  • Isosurfaces in Transient Explorer. Isosurfaces are now supported in Transient Explorer mode.
  • Support of 4K Monitors. The high resolution of 4K monitors is now supported.
  • Sector periodicity visualization improved. You can now display results for the entire model calculated with the sector periodicity option.
  • GIF Animation improved. You can now select the transparent color for animations saved as GIF. In addition the quality of GIF animation was improved.
  • Section view in FloEFDView. FloEFDView supports section views of the geometry.

 

For a detailed list of new features, refer to your product specific release notes manual or README file, available in the installed software tree or on Support Center.

 

Release Highlights pdf file.

 

For more information please call us or send us an email info@innofour.com

 

 

 

 

13th March 2018 New Release FloMASTER V9.0
26th February 2018 New Release PADS VX.2.3
8th February 2018 FloEFD Frontloading CFD Award
14th November 2017 New Release FloTHERM XT V3.1
21st August 2017 BOM Connector 7.6 Released
20th July 2017 Release of FloTHERM v12
29th August 2016 PADS VX.2 Now Available
29th February 2016 Sherlock User Forum
1st February 2016 TLA Winner 2015
4th August 2015 New PADS Solutions!
29th June 2015 UVM Framework
23rd June 2015 PCB Sketch Router
21st April 2015 HDL Designer 2015.1 Release
19th February 2015 BOM Connector™
14th December 2014 Multi-board PCB Systems Design
9th September 2014 New course: Introduction to UVM
20th May 2014 Mentor PCB Forum
18th March 2014 Xpedition VX release
3rd February 2014 DfR Solutions - Best of 2013
22nd October 2012 Dongle discontinuations
19th October 2012 PADS 9.5 Now Available!
20th April 2011 Introducing Questa Core
1st February 2011 PADS 9.3 available
22nd November 2010 Why customers choose BluePrint
30th June 2010 PADS9.2 Available
8th June 2010 5 Reasons to Adopt PLM
18th March 2010 Mentor-Valor Acquisition
15th February 2010 InnoFour goes Scandinavia
18th January 2010 PADS v9.1 available
9th October 2009 CAM350 v10.1 available
26th May 2009 Introducing PADS v9.0
2nd February 2009 CAM350-150 Bundle Introduction