Mentor Graphics: HyperLynx 8.2 is shipping!

Mentor Graphics: HyperLynx 8.2 is shipping! 

just released: HyperLynx 8.2

 

Mentor Graphics Corporation (NASDAQ: MENT) has released HyperLynx® version 8.2, a suite of analysis tools offering significant new functionality for optimizing printed circuit board (PCB) designs, including 3D full-wave field solving, and integrated thermal/power co-simulation analysis capabilities. Analysis of today’s multi-GHz SERDES channel interconnects—such as PCIe-Gen 3—requires specialized 3D modeling for accurate signal integrity analysis.

 

Another major feature is the integration of the HyperLynx Thermal analysis with the HyperLynx PI (power integrity) products to calculate the affects of heat generated by areas of high current density in complex power distribution networks (PDNs) on the PCB. These major enhancements enable HyperLynx users to reliably utilize the industry’s most advanced high-speed IC and PCB technologies while developing more competitive products and hitting tight market windows.

For digital serial interconnects operating in data rate ranges of 5 to 28Gbps, it is important to include the 3D effects of certain PCB structures, such as vias, in the signal integrity analysis. However, analyzing the complete interconnect using full-wave 3D field analysis would not be practical, as the computing times would be excessive. Using a new feature in the HyperLynx 8.2 product, analysis is performed with 3D full-wave models for structures such as vias, and with 2D/2.5D solutions for constructs such as traces. The result is fast and accurate full interconnect analysis.

 

“We’ve used the new HyperLynx LineSim interface 3D EM solver to analyze our vias for very high-speed interconnects,” said Yanfeng Yu, principal engineer, ZTE Corporation. “This feature is one of the must-have features for serial channel design. It's easy to use and the performance is very good.”

Another effect of today’s more advanced, high-performance designs is the necessity for multiple and complex power distribution networks due to the increasing number of supply voltages. This complexity can result in neck-down areas of copper on the PCB and high current densities which can then lead to excessive copper heating and, in severe cases, copper failure. The HyperLynx PI product now includes co-simulation between power integrity DC and thermal analysis to reflect the combination of heating of the PDNs and heat dissipation from the components, and the increased copper resistivity due to this heating. These integrated products now alert the designer to possible product failures due to excessive heat, as well as possible signal/power integrity performance issues.

 

“This merging of signal/power integrity and thermal analysis is yet another example of how once isolated design disciplines are affecting each other,” said Dave Kohlmeier, director of analysis products, Systems Design Division, Mentor Graphics. “Mentor’s strategy of creating an integrated suite of analysis tools that allow collaboration among the many disciplines involved in the product development process is enabling our customers to deliver more advanced and competitive products to market faster and with higher quality.”

 

A look at the HyperLynx suite:

For industry-differentiating integration with 3D electromagnetic modeling, customers can choose Expedition or HyperLynx BoardSim / LineSim with HyperLynx 3D EM for fast time-to-simulation and results. These links automate the time-consuming, error-prone setup that plagues competitive 3D solvers.

 

  A truly integrated tool for co-simulation of thermal and DC drop analysis, allowing engineers and PCB designers to identify and rectify hot spots on components and PCBs with what-if analysis of component placement, stackup design, and mechanical cooling techniques.

 

 

Extensive new capabilities for SERDES design include support for the IBIS-AMI modeling standard. New AMI sweeps let customers rapidly optimize silicon settings for high-bandwidth channels. We're also giving customers on support more value by pushing features from higher-tier packages into lower ones.

 

 

HyperLynx PI and 3D EM customers can use unlimited cores without an uplift. This is a key differentiator against all competitors. Exploit our advantages! Click here to learn more ways to engage customers. 

 

 

Even non-simulating project engineers can analyze PCBs with HyperLynx DRC, a new tool that automates design rule checking, improves communication during design reviews, and allows customers to capture and internally share IP.

 

 

 

 

 

 

21st August 2017 BOM Connector 7.6 Released
20th July 2017 Release of FloTHERM v12
29th August 2016 PADS VX.2 Now Available
29th February 2016 Sherlock User Forum
1st February 2016 TLA Winner 2015
4th August 2015 New PADS Solutions!
29th June 2015 UVM Framework
23rd June 2015 PCB Sketch Router
21st April 2015 HDL Designer 2015.1 Release
19th February 2015 BOM Connector™
14th December 2014 Multi-board PCB Systems Design
9th September 2014 New course: Introduction to UVM
20th May 2014 Mentor PCB Forum
18th March 2014 Xpedition VX release
3rd February 2014 DfR Solutions - Best of 2013
22nd October 2012 Dongle discontinuations
19th October 2012 PADS 9.5 Now Available!
20th April 2011 Introducing Questa Core
1st February 2011 PADS 9.3 available
22nd November 2010 Why customers choose BluePrint
30th June 2010 PADS9.2 Available
8th June 2010 5 Reasons to Adopt PLM
18th March 2010 Mentor-Valor Acquisition
15th February 2010 InnoFour goes Scandinavia
18th January 2010 PADS v9.1 available
9th October 2009 CAM350 v10.1 available
26th May 2009 Introducing PADS v9.0
2nd February 2009 CAM350-150 Bundle Introduction