Scandinavian Electronic Event 2012 - Review

Scandinavian Electronic Event - 2012

S.E.E. Review

 

This year, with great pleasure, InnoFour participated at the Scandinavian Electronics Event / S.E.E. 2012. Our goal was to show you the benefits of linking EDA (Mentor Graphics) to PLM (Omnify Software), and we can conclude that we have succeeded.

The InnoFour-team at S.E.E: Yehoshua, Ivonne, Bert, Niklas and Bas

 

PLM

We had a constant presentation of how Omnify Software PLM can avoid delayed products. This software can manage all of the essential information for the phases of a product's life span (concept, development, production, support and end-of-life).

 

The Omnify PLM system is designed to manage all product content information such as:

  • Item Record Data: Part Numbers, Descriptions, Attributes, etc.
  • Revisions: Complete Item, BOM, Document Revision Management
  • Bill of Materials: Revisions, Hierarchy/Relationships
  • Documents: Design/Manufacturing Files, Datasheets, etc.
  • Changes/ECOs: Structured/Automated Changes (ECRs, ECOs, ECNs)
  • Project Data: Schedules, Time lines, Resources, Deliverables

 

Taking into account that the Omnify PLM Software is an affordable “Out of the Box” solution, both engineering and manufacturing can now take control of PLM avoiding e.g. additional costs of scrapped boards.

 

 

EDA

We also showed how EDA solutions take innovations and ideas from a sketch to a saleable product implemented on a PCB, or as SoC on FPGA or IC. InnoFour provides best in class ICs, FPGAs and PCBs design solutions based on Mentor Graphics software. Using advanced planning and  verification techniques along the design process, ensures predictable design process that lead to a functional device. Mentor Graphics hardware design solutions enable you to do correct planning of your product, rational designing and thoroughly verification and by that avoid the high costs of product delay, design error and system mal function.

 

  • System Description and concept verification based on ESL (Electronic System Level design).
  • Functional  design entry in different abstract level as C/C++, schematic , RTL
  • Test Manufacturing design entry like Built In Self Repair, TAP controllers for JTAG operation LogicBIST and TestCompress
  • Manufacturing Test preparation and production scrap analysis
  • IC floorplanning
  • IC verification and
  • Requirement tracing for safety critical system (DO-254)

 

SEE you later!

 

 

 

 

14th November 2017 New Release FloTHERM XT V3.1
21st August 2017 BOM Connector 7.6 Released
20th July 2017 Release of FloTHERM v12
29th August 2016 PADS VX.2 Now Available
29th February 2016 Sherlock User Forum
1st February 2016 TLA Winner 2015
4th August 2015 New PADS Solutions!
29th June 2015 UVM Framework
23rd June 2015 PCB Sketch Router
21st April 2015 HDL Designer 2015.1 Release
19th February 2015 BOM Connector™
14th December 2014 Multi-board PCB Systems Design
9th September 2014 New course: Introduction to UVM
20th May 2014 Mentor PCB Forum
18th March 2014 Xpedition VX release
3rd February 2014 DfR Solutions - Best of 2013
22nd October 2012 Dongle discontinuations
19th October 2012 PADS 9.5 Now Available!
20th April 2011 Introducing Questa Core
1st February 2011 PADS 9.3 available
22nd November 2010 Why customers choose BluePrint
30th June 2010 PADS9.2 Available
8th June 2010 5 Reasons to Adopt PLM
18th March 2010 Mentor-Valor Acquisition
15th February 2010 InnoFour goes Scandinavia
18th January 2010 PADS v9.1 available
9th October 2009 CAM350 v10.1 available
26th May 2009 Introducing PADS v9.0
2nd February 2009 CAM350-150 Bundle Introduction