New Release FloMASTER V9.0

Release FloMASTER V9.0

We are pleased to announce that FloMASTER V9.0 is available for download from Support Center.

 

FloMASTER V9 introduces several new capabilities, these include.

 

CAD 2 FloMASTER (CAD2FM)

  • CAD2FM introduces a new work flow that can improve the productivity of building FloMASTER sub system from Mechanical CAD by upto 80 % compared with a manual measure, add, enter data approach. CAD2FM uses FloEFD to identify the fluid volume and it’s center line and then converts this to FloMASTER elements. This can then be imported to a FloMASTER sub system with all connectivity and geometry set for addition to a network
  • Please note that CAD2FM export requires FloEFD 17.2, this will be released shortly

 

Air Conditioning

  • FloMASTER V9.0 sees the addition of new and important functionality to our Enthalpy solver, this is in the form of AC systems. This builds upon the work done for Waste Heat Recovery systems and will enable AC systems to be created that cover a wide range of use cases from traditional automotive and building services systems through to, but not limited to complex multiple loop, multi component systems for advanced EV cooling solutions and aerospace applications. When the new components are used in conjunction with the existing Vapor Cycle components developed for Organic Rankine Cycle Waste Heat Recovery Systems a full range of thermodynamic cycles can be modelled

 

 

User Experience

  • In FloMASTER V9 the focus on user experience has continued with a new viewer for the results of a Gas Turbine cavity and the new Dashboard allowing multiple plots to be viewed within the same window.

 

For a full rundown of the new functionality please read the release highlights.

 

For more information please call us or send us an email info@innofour.com

 

 

26th September 2018 BOM Connector 8 Released
17th September 2018 Xpedition® - VX.2.4 Released
14th September 2018 PADS VX.2.4. released
11th September 2018 HyperLynx VX.2.4 Released
7th September 2018 FloTHERM® ΔTJ Award
13th March 2018 New Release FloMASTER V9.0
26th February 2018 New Release PADS VX.2.3
8th February 2018 FloEFD Frontloading CFD Award
14th November 2017 New Release FloTHERM XT V3.1
21st August 2017 BOM Connector 7.6 Released
20th July 2017 Release of FloTHERM v12
29th August 2016 PADS VX.2 Now Available
29th February 2016 Sherlock User Forum
1st February 2016 TLA Winner 2015
4th August 2015 New PADS Solutions!
29th June 2015 UVM Framework
23rd June 2015 PCB Sketch Router
21st April 2015 HDL Designer 2015.1 Release
19th February 2015 BOM Connector™
14th December 2014 Multi-board PCB Systems Design
9th September 2014 New course: Introduction to UVM
20th May 2014 Mentor PCB Forum
18th March 2014 Xpedition VX release
3rd February 2014 DfR Solutions - Best of 2013
22nd October 2012 Dongle discontinuations
19th October 2012 PADS 9.5 Now Available!
20th April 2011 Introducing Questa Core
1st February 2011 PADS 9.3 available
22nd November 2010 Why customers choose BluePrint
30th June 2010 PADS9.2 Available
8th June 2010 5 Reasons to Adopt PLM
18th March 2010 Mentor-Valor Acquisition
15th February 2010 InnoFour goes Scandinavia
18th January 2010 PADS v9.1 available
9th October 2009 CAM350 v10.1 available
26th May 2009 Introducing PADS v9.0
2nd February 2009 CAM350-150 Bundle Introduction