Xpedition® - VX.2.4 Released

What’s New in Xpedition® - VX.2.4

The latest releases of Xpedition address the increasing complexity of today’s advanced system designs through an emphasis on both ease-of-use and team productivity.


New Features

Xpedition Layout

Xpedition Layout and Xpedition Team Layout have been enhanced with a number of new features that improve product usability and efficiency in the X

-ENTP VX.2 .4 release.


Xpedition Designer

The VX.2.4 release of Xpedition Designer addresses a number of user reported issues and incorporates user feedback on new functionality introduced in the past release.


Xpedition System Designer

Xpedition Systems Designer VX.2 .4 represents a focus on expanding the functionality, performance improvements and usability of the product.


Xpedition FPGA I/O Optimizer

Xpedition FPGA I/O Optimizer is the FPGA IO Optimization tool for the Xpedition flow. I/O Optimizer is an easy to use, integral part of Xpedition Designer environment. The IOPT signal to device pin assignment and the floorplan environment enables the FPGA IO optimization of single and multi-FPGAs providing productivity savings across the FPGA on board design flow.


EDM (EDM Common, EDM Library, EDM Design, EDM Server)

EDM has been enhanced with a number of new features that improve product usability and efficiency in the X-ENTP VX.2.4 release.


Xpedition AMS

Features & Functionality

  • Setting up PCB schematics for simulation
  • Partial schematic simulation
  • Streamlined project creation
  • S-parameter simulation support
  • Faster simulation setup
  • PSpice Convertor & PSpice model support
  • Eldo and ADMS simulator access
  • Using Xpedition AMS with earlier Xpedition environment installs


Valor NPI

The following new features are available in this release:

  • Valor DFM add-in with Xpedition VX.2.4


The Xpedition Enterprise VX.2.4 Release Highlights can be found here.




28th April 2021 Supply Chain Application
21st April 2021 Release Polarion ALM 21 R1
12th November 2020 Release HyperLynx VX.2.8
12th November 2020 Release Xpedition VX.2.8
12th November 2020 Release PADS VX.2.8
15th October 2020 Release Polarion ALM 20 R2
16th April 2020 DownStream Release Update
10th March 2020 What's New in PADS VX.2.7
26th September 2019 DownStream Release Update
23rd September 2019 Polarion ALM 19.2 Release
10th September 2019 Mentor VX.2.6. Release
10th April 2019 Release Polarion ALM 19
24th January 2019 Release Sherlock 6.1
18th December 2018 Release FloEFD Version 18.0
26th September 2018 BOM Connector 8 Released
17th September 2018 Xpedition® - VX.2.4 Released
14th September 2018 PADS VX.2.4. released
11th September 2018 HyperLynx VX.2.4 Released
7th September 2018 FloTHERM® ΔTJ Award
13th March 2018 New Release FloMASTER V9.0
26th February 2018 New Release PADS VX.2.3
8th February 2018 FloEFD Frontloading CFD Award
14th November 2017 New Release FloTHERM XT V3.1
21st August 2017 BOM Connector 7.6 Released
20th July 2017 Release of FloTHERM v12
29th August 2016 PADS VX.2 Now Available
29th February 2016 Sherlock User Forum
1st February 2016 TLA Winner 2015
4th August 2015 New PADS Solutions!
29th June 2015 UVM Framework
23rd June 2015 PCB Sketch Router
21st April 2015 HDL Designer 2015.1 Release
19th February 2015 BOM Connector™
14th December 2014 Multi-board PCB Systems Design
9th September 2014 New course: Introduction to UVM
20th May 2014 Mentor PCB Forum
18th March 2014 Xpedition VX release
3rd February 2014 DfR Solutions - Best of 2013
22nd October 2012 Dongle discontinuations
19th October 2012 PADS 9.5 Now Available!
20th April 2011 Introducing Questa Core
1st February 2011 PADS 9.3 available
22nd November 2010 Why customers choose BluePrint
30th June 2010 PADS9.2 Available
8th June 2010 5 Reasons to Adopt PLM
18th March 2010 Mentor-Valor Acquisition
15th February 2010 InnoFour goes Scandinavia
18th January 2010 PADS v9.1 available
9th October 2009 CAM350 v10.1 available
26th May 2009 Introducing PADS v9.0
2nd February 2009 CAM350-150 Bundle Introduction