New Mentor Xpedition PCB design platform

New Mentor Xpedition PCB design platform delivers inclusive “shift-left” multi-dimensional verification

  • Printed circuit board (PCB) engineers can develop accurate virtual prototypes to validate designs throughout the PCB design process with ease
  • Xpedition® platform provides the industry’s first “shift-left” upfront verification capability within the engineer’s authoring environment to minimize design re-spins and improve overall product quality

 

Mentor, a Siemens business, today announced the new Xpedition® printed circuit board (PCB) design platform focused on multi-dimensional verification. With the increasing complexities of today’s systems, PCB design managers can be challenged by the lack of robust verification tools and/or the difficulty in applying these tools, to identify problems early in the design development phase. Mentor tools enable engineers to integrate a broad range of easy-to-use verification tools into a PCB design platform within a singular authoring environment to identify problems at the schematic or layout phases. This new Xpedition platform for non-specialist PCB engineers delivers accurate concurrent design analysis and verification, and comprehensive tool integration, helping achieve substantial time and cost savings while delivering higher-quality products.

 

According to a recent electronics simulation-driven design study by Lifecycle Insights (Sept. 13, 2018), the average number of design re-spins is 2.9 per project, which amounts to approximately 16 days of unplanned development time and $82.6K (USD) in additional costs. The study found that PCB design teams who adopted a “shift-left” verification methodology across their design processes realized a 14 percent increase in on-time project delivery, reduced re-spins, and overall improved design quality. “Our most recent research shows that the broad use of analysis and verification throughout the design phase directly supports engineering management’s efforts to compress the design cycle while improving board system quality,” stated Chad Jackson, president and principal analyst, Lifecycle Insights. “Mentor's advancements in PCB design simulation solutions is a critical enabler to such efforts, and managers should take a hard look at these offerings."

 

Authoring Environment for Non-specialist PCB Designers
Leveraging industry best-practice processes, the Xpedition verification platform is designed for non-specialist PCB designers to enable quick and intuitive simulation and analysis functions. Launched within the designer’s authoring tool, integrated verification technologies provide automatic model creation, concurrent simulation, cross probing from results, and error reviews within a single environment.

 

Multi-Dimensional Verification Solution
The Xpedition platform is comprised of a broad range of robust technologies: schematic analysis, signal integrity (SI) and power integrity (PI) analysis, electrical rule checking (ERC), thermal simulation, vibration analysis, design-for-fab (DFF), assembly (DFA) and test (DFT) manufacturability testing. These integrated technologies, applied within a single authoring environment familiar to the designer or design team, provide early virtual design prototypes. The new Xpedition platform introduces a comprehensive, multi-dimensional solution for upfront design verification, from concept to design hand-off for assured manufacturability.

 

The new Xpedition verification platform incorporates novel technologies in several areas:

 

  • Schematic design verification: new, fully-automated and powerful schematic integrity tool to replace manual visual schematic inspection, eliminating re-spins early in the design by as much as 70 percent.
  • Design-for-test analysis: identifies test point requirements that are automatically passed from schematic design to layout as constraints to improve testability coverage. This feature creates test and inspection outputs for machines in process preparation with early diagnostics, thereby lowering the overall cost of testing.

 

Improved integrations in the new Xpedition platform include:

 

  • Design-for-manufacturability (DFM) analysis: provides comprehensive DFM analysis covering fabrication, assembly, test, flex/rigid-flex, substrate and panel validation early and concurrently during PCB design, without leaving the layout in the new Xpedition integration environment.
  • Electrical performance sign-off: automatic electrical rule checking (ERC) quickly identifies critical signal integrity, power integrity and EMI/EMC issues concurrently with PCB layout, potentially accelerating design reviews from days to just minutes.

 

“Recognizing that systems design complexity continues to increase, one of Mentor’s key initiatives is to empower our customers with industry-leading verification technologies, which have been historically leveraged in specialized, or discrete instances,” stated A.J. Incorvaia, senior vice president, Mentor Electronic Board Systems. “With our new Xpedition platform targeting PCB designers, these integrated solutions enable verification within the design process to ease deployment, accelerate time-to-results, and allow our customers to maximize their investments.”

 

Product Availability
The Xpedition verification platform is available today, and the suite of Mentor tools supports most non-Mentor design flows. For more information, contact us, send an email or visit the website: www.mentor.com/pcb/xpedition. See the YouTube video on this new solution: https://youtu.be/sK_d6fro1hs and download the technology white paper: www.mentor.com/xpedition-verification-paper. Also view the webinar: www.mentor.com/xpedition-verification-webinar.

 

ABOUT MENTOR GRAPHICS

Mentor Graphics Corporation, a Siemens business, is a world leader in electronic hardware and software design solutions, providing products, consulting services, and award-winning support for the world’s most successful electronic, semiconductor, and systems companies. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. Web site: http://www.mentor.com.

 

Mentor Graphics, Mentor, and Xpedition are trademarks or registered trademarks of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owner.

 

26th September 2018 BOM Connector 8 Released
17th September 2018 Xpedition® - VX.2.4 Released
14th September 2018 PADS VX.2.4. released
11th September 2018 HyperLynx VX.2.4 Released
7th September 2018 FloTHERM® ΔTJ Award
13th March 2018 New Release FloMASTER V9.0
26th February 2018 New Release PADS VX.2.3
8th February 2018 FloEFD Frontloading CFD Award
14th November 2017 New Release FloTHERM XT V3.1
21st August 2017 BOM Connector 7.6 Released
20th July 2017 Release of FloTHERM v12
29th August 2016 PADS VX.2 Now Available
29th February 2016 Sherlock User Forum
1st February 2016 TLA Winner 2015
4th August 2015 New PADS Solutions!
29th June 2015 UVM Framework
23rd June 2015 PCB Sketch Router
21st April 2015 HDL Designer 2015.1 Release
19th February 2015 BOM Connector™
14th December 2014 Multi-board PCB Systems Design
9th September 2014 New course: Introduction to UVM
20th May 2014 Mentor PCB Forum
18th March 2014 Xpedition VX release
3rd February 2014 DfR Solutions - Best of 2013
22nd October 2012 Dongle discontinuations
19th October 2012 PADS 9.5 Now Available!
20th April 2011 Introducing Questa Core
1st February 2011 PADS 9.3 available
22nd November 2010 Why customers choose BluePrint
30th June 2010 PADS9.2 Available
8th June 2010 5 Reasons to Adopt PLM
18th March 2010 Mentor-Valor Acquisition
15th February 2010 InnoFour goes Scandinavia
18th January 2010 PADS v9.1 available
9th October 2009 CAM350 v10.1 available
26th May 2009 Introducing PADS v9.0
2nd February 2009 CAM350-150 Bundle Introduction