Simcenter FloEFD Version 2019.2 released

Simcenter FloEFD Version 2019.2 released


FloEFD, FloEFD for CATIA V5, FloEFD for Creo, FloEFD for NX and FloEFD for Solid Edge version 2019.2 are now available to download from Support Center.


Please find underneaht the list of new features:

  • Heat Sink model in porous media. The heat sink model represents a gas-liquid cross-flow heat exchanger which is defined by a conductive porous medium. Cooling gas flowing through the porous medium is the actual fluid specified in the project. Hot liquid flowing perpendicularly is a virtual fluid and just adds heat to the system.
  • Radiation scattering. In the tasks with radiation, scattering of radiation in solid bodies can now be taken into account. Scattering coefficient and Scattering anisotropy coefficient can be specified under Radiation Properties for the Solid Material in the Engineering Database.
  • Radiation source. Radiation source can now depend on coordinates and time.
  • Temperature deviation for altitude. The atmospheric pressure and temperature can be defined by setting the Altitude. Now a temperature deviation can be specified for the altitude. In this case the resulting temperature is calculated as the sum of temperature and temperature deviation.
  • Vapor diffusion coefficient dependency on temperature for membranes. Now vapor diffusion coefficient of a membrane can be specified dependent on temperature.
  • Dependency. Coordinate dependency for turbulent parameters, components of velocity and Mach number, Pressure is added.
  • Improved separate mode in surface parameters. Earlier when local and integral surface parameters values were displayed for each contour (loop) separately, such contours were named by components materials names. In case when in the task there were several components with the same materials, different contours were named equally. Now contours are named uniquely by the components names.
  • Add from component (Linked conditions). Possibility to add local mesh condition from a component.
  • Design of experiments. Response Surface viewer has now a chart for objective function.
  • Free surface. Air compression is taken into account.
  • Cauer export from Calibration. You can now export structure function into Cauer thermal network format.
  • MLS update. This version supports Mentor Standard Licensing (MSL) version 2019_2 which uses FlexNet™ This may require updating the license server.
  • New geometry modeler. SW OEM 2019 SP2 is used as geometry modeller for FloEFD Standalone 2019.2.
  • FloEFD for CATIA V5 Project template. Project template can be used by other FloEFD products so sharing simulation tasks among different CAD systems is easy.
  • Siemens NX. Support of Siemens NX 1859.3203, Siemens NX 1855.2900.


Via Support Center you can check the Simcenter FloEFD Release Notes for all versions.


For more information please call us or send us an email




12th November 2020 Release HyperLynx VX.2.8
12th November 2020 Release Xpedition VX.2.8
12th November 2020 Release PADS VX.2.8
15th October 2020 Release Polarion ALM 20 R2
16th April 2020 DownStream Release Update
10th March 2020 What's New in PADS VX.2.7
26th September 2019 DownStream Release Update
23rd September 2019 Polarion ALM 19.2 Release
10th September 2019 Mentor VX.2.6. Release
10th April 2019 Release Polarion ALM 19
24th January 2019 Release Sherlock 6.1
18th December 2018 Release FloEFD Version 18.0
26th September 2018 BOM Connector 8 Released
17th September 2018 Xpedition® - VX.2.4 Released
14th September 2018 PADS VX.2.4. released
11th September 2018 HyperLynx VX.2.4 Released
7th September 2018 FloTHERM® ΔTJ Award
13th March 2018 New Release FloMASTER V9.0
26th February 2018 New Release PADS VX.2.3
8th February 2018 FloEFD Frontloading CFD Award
14th November 2017 New Release FloTHERM XT V3.1
21st August 2017 BOM Connector 7.6 Released
20th July 2017 Release of FloTHERM v12
29th August 2016 PADS VX.2 Now Available
29th February 2016 Sherlock User Forum
1st February 2016 TLA Winner 2015
4th August 2015 New PADS Solutions!
29th June 2015 UVM Framework
23rd June 2015 PCB Sketch Router
21st April 2015 HDL Designer 2015.1 Release
19th February 2015 BOM Connector™
14th December 2014 Multi-board PCB Systems Design
9th September 2014 New course: Introduction to UVM
20th May 2014 Mentor PCB Forum
18th March 2014 Xpedition VX release
3rd February 2014 DfR Solutions - Best of 2013
22nd October 2012 Dongle discontinuations
19th October 2012 PADS 9.5 Now Available!
20th April 2011 Introducing Questa Core
1st February 2011 PADS 9.3 available
22nd November 2010 Why customers choose BluePrint
30th June 2010 PADS9.2 Available
8th June 2010 5 Reasons to Adopt PLM
18th March 2010 Mentor-Valor Acquisition
15th February 2010 InnoFour goes Scandinavia
18th January 2010 PADS v9.1 available
9th October 2009 CAM350 v10.1 available
26th May 2009 Introducing PADS v9.0
2nd February 2009 CAM350-150 Bundle Introduction