Release Simcenter FloEFD Version 2019.4

Release Simcenter FloEFD Version 2019.4


FLOEFD, FLOEFD for CATIA V5, FLOEFD for Creo, FLOEFD for NX and FLOEFD for Solid Edge version 2019.4 has been released and are available to download from SupportNet.


New features:

  • Illuminance Near field and Far field plot. You can now display Illuminance (incoming radiant flux adjusted for the capability of human eye to see the light, i.e. intensity of visible light) plot in the near field (close to the light source) and Luminous Intensity versus angle far away from the light source (so that the source can be considered as point source).
  • LED additional rays. You can now add additional rays for a radiated LED (a LED with radiation source automatically enabled once you set LEDs radiation properties).
  • Radiation absorption cut-off wavelength. You can now specify a radiation wavelength above which the material is considered to be opaque.
  • Import Structure function. Structure function (RC ladder) from T3Ster (*.xCTM) can now be imported into Network Assembly.
  • Via material selection. All vias in SmartPCB can be assigned with either dielectric or copper material or excluded from the calculation.
  • FMU support. Functional Mock-up Interface is now supported by FLOEFD (version 2.0). FMU export and FMU import allows to perform co-simulations of FLOEFD with various simulation tools supporting FMI.
  • Export forces. The new export of forces makes it easier to interface FLOEFD with Simcenter 3D Motion.
  • Component Control filters. You can show hidden or duplicated components in the Component Control dialog.
  • Plot Min Max values use crop. Plot Min and Max values are now calculated taking into account the plot’s crop.


Via Support Center you can check the Simcenter FloEFD Release Notes for all versions.


For more information please call us or send us an email


12th November 2020 Release HyperLynx VX.2.8
12th November 2020 Release Xpedition VX.2.8
12th November 2020 Release PADS VX.2.8
15th October 2020 Release Polarion ALM 20 R2
16th April 2020 DownStream Release Update
10th March 2020 What's New in PADS VX.2.7
26th September 2019 DownStream Release Update
23rd September 2019 Polarion ALM 19.2 Release
10th September 2019 Mentor VX.2.6. Release
10th April 2019 Release Polarion ALM 19
24th January 2019 Release Sherlock 6.1
18th December 2018 Release FloEFD Version 18.0
26th September 2018 BOM Connector 8 Released
17th September 2018 Xpedition® - VX.2.4 Released
14th September 2018 PADS VX.2.4. released
11th September 2018 HyperLynx VX.2.4 Released
7th September 2018 FloTHERM® ΔTJ Award
13th March 2018 New Release FloMASTER V9.0
26th February 2018 New Release PADS VX.2.3
8th February 2018 FloEFD Frontloading CFD Award
14th November 2017 New Release FloTHERM XT V3.1
21st August 2017 BOM Connector 7.6 Released
20th July 2017 Release of FloTHERM v12
29th August 2016 PADS VX.2 Now Available
29th February 2016 Sherlock User Forum
1st February 2016 TLA Winner 2015
4th August 2015 New PADS Solutions!
29th June 2015 UVM Framework
23rd June 2015 PCB Sketch Router
21st April 2015 HDL Designer 2015.1 Release
19th February 2015 BOM Connector™
14th December 2014 Multi-board PCB Systems Design
9th September 2014 New course: Introduction to UVM
20th May 2014 Mentor PCB Forum
18th March 2014 Xpedition VX release
3rd February 2014 DfR Solutions - Best of 2013
22nd October 2012 Dongle discontinuations
19th October 2012 PADS 9.5 Now Available!
20th April 2011 Introducing Questa Core
1st February 2011 PADS 9.3 available
22nd November 2010 Why customers choose BluePrint
30th June 2010 PADS9.2 Available
8th June 2010 5 Reasons to Adopt PLM
18th March 2010 Mentor-Valor Acquisition
15th February 2010 InnoFour goes Scandinavia
18th January 2010 PADS v9.1 available
9th October 2009 CAM350 v10.1 available
26th May 2009 Introducing PADS v9.0
2nd February 2009 CAM350-150 Bundle Introduction