Release HyperLynx VX.2.8

 

The latest releases of HyperLynx address the increasing complexity of today’s advanced system designs through an emphasis on both ease-of-use and team productivity.

 

Note: The following is a condensed summary of the HyperLynx release highlights. Mentor customers should refer to the Release Highlights on Support Center for detailed information regarding all new features and enhancements.

 

Configurable SerDes Compliance Analysis Engine

The new SerDes Compliance Analysis engine allows support for new protocols to be added quickly. Over 100 popular protocols are now supported out-of-the-box with the 2.8 release, including multiple standards from the Ethernet, Fiber Channel, HDMI, JESD, MIPI, OIF-CEI, PCIE and USB families.

 

DDR5/LPDDR5 Support

Simulation of DDR5/LPDDR5 technologies with IBIS-AMI models is now supported. Interactive DDR5 simulation allows quick what-if experimentation, while DDRcx batch simulation provides full interface-level verification for both pre-layout and post-layout analysis.

 

Pulse Response Simulation

Pulse response simulation provides a quick, easy way to assess signal quality and routing consistency without the need for IBIS simulation models. It's a great way to run first-order analysis on a layout to identify signals that require a closer investigation.

 

HLDRC Wizards

HLDRC wizards streamline the process of setting up and running analysis with HLDRC. The Project Setup Wizard speeds the process getting a design ready to analyze. The DDR wizard ESD wizards automate rule setup and verification for DDR interfaces and ESD constraints. The Quick Check wizard runs the 7 most common rules for PCB layout. Custom wizard creation is also supported as part of the HLDRC VX.2.8 release.

 

New in HyperLynx Advanced Solvers

It's easier than ever to visualize, examine and edit of rigid-flex designs directly in the solver GUI. 3D Explorer includes an new solder ball breakout template that speeds the process of optimizing breakout patterns for large devices. Full-wave solver now provides power density animation plots that show how a stucture conducts, reflects or scatters energy.

 

EDM/HyperLynx Integration Update

VX.2.8 expands the EDM and HyperLynx integration to manage 3 new data types created by the HL SI/PI/Thermal, HyperLynx DRC and HyperLynx Advanced Solvers tools. This lets users view simulation reports directly from EDM.

 

DC Drop Improvements

HyperLynx PI now supports multi-phase power suppiles with remote sense lines, reporting power supply voltages required to meet voltage requirements at the load.

 

Call or email us if you want more information.

 

 

12th November 2020 Release HyperLynx VX.2.8
12th November 2020 Release Xpedition VX.2.8
12th November 2020 Release PADS VX.2.8
15th October 2020 Release Polarion ALM 20 R2
16th April 2020 DownStream Release Update
10th March 2020 What's New in PADS VX.2.7
26th September 2019 DownStream Release Update
23rd September 2019 Polarion ALM 19.2 Release
10th September 2019 Mentor VX.2.6. Release
10th April 2019 Release Polarion ALM 19
24th January 2019 Release Sherlock 6.1
18th December 2018 Release FloEFD Version 18.0
26th September 2018 BOM Connector 8 Released
17th September 2018 Xpedition® - VX.2.4 Released
14th September 2018 PADS VX.2.4. released
11th September 2018 HyperLynx VX.2.4 Released
7th September 2018 FloTHERM® ΔTJ Award
13th March 2018 New Release FloMASTER V9.0
26th February 2018 New Release PADS VX.2.3
8th February 2018 FloEFD Frontloading CFD Award
14th November 2017 New Release FloTHERM XT V3.1
21st August 2017 BOM Connector 7.6 Released
20th July 2017 Release of FloTHERM v12
29th August 2016 PADS VX.2 Now Available
29th February 2016 Sherlock User Forum
1st February 2016 TLA Winner 2015
4th August 2015 New PADS Solutions!
29th June 2015 UVM Framework
23rd June 2015 PCB Sketch Router
21st April 2015 HDL Designer 2015.1 Release
19th February 2015 BOM Connector™
14th December 2014 Multi-board PCB Systems Design
9th September 2014 New course: Introduction to UVM
20th May 2014 Mentor PCB Forum
18th March 2014 Xpedition VX release
3rd February 2014 DfR Solutions - Best of 2013
22nd October 2012 Dongle discontinuations
19th October 2012 PADS 9.5 Now Available!
20th April 2011 Introducing Questa Core
1st February 2011 PADS 9.3 available
22nd November 2010 Why customers choose BluePrint
30th June 2010 PADS9.2 Available
8th June 2010 5 Reasons to Adopt PLM
18th March 2010 Mentor-Valor Acquisition
15th February 2010 InnoFour goes Scandinavia
18th January 2010 PADS v9.1 available
9th October 2009 CAM350 v10.1 available
26th May 2009 Introducing PADS v9.0
2nd February 2009 CAM350-150 Bundle Introduction