Catch manufacturability issues early with integrated DFM analysis
When you release a printed circuit board to manufacturing, the fabricator often does an analysis of the design and if a fabrication issue is found, they will typically “fix” it without communicating this back to you.
For example, they may want to spread or space traces out a bit further to increase yield. But what happens if this was a critical clock signal that you routed to a specific length? The circuit will no longer perform as expected.
What if you could do this same fabrication analysis earlier in the design, detect manufacturing issues, and correct them right in your design tool?
What You Will Learn:
- How to access comprehensive fabrication DFM analysis capabilities from within your layout environment
- Review manufacturability issues in the Hazard Explorer
- Address issues immediately by cross probing to the problem area
- Obtain an easy-to-read PDF report of the analysis
Who Should Attend:
- PCB designers
- Engineering/CAD managers
- Manufacturing engineers
Live Webinar: Catch manufacturability issues early with integrated DFM analysis
Tuesday July 11, 2023
18:00 hr CEST
In this webinar we will demonstrate how to build your stackup to achieve the greatest accuracy in your simulations. In addition, we will show you a new tool called Z-planner that enables greater materials granularity in your board construction.Level up your game with DESIGNrev and RVE #insidertips Expert Series
In this Expert Series webinar you will see many valuable tips, tricks and capabilities that we’ve found to be uniquely valuable. Some are tool specific, some are situation specific but all of these deserve to be shared as tips and tricks to add to your personal toolbox if you use Calibre tools for physical design verification.