Training

We offer a wide range of training classes which are especially designed to accelerate productivity and to help you to apply the products and meet your specific needs.

As technologies rapidly evolve, disparities emerge between the core knowledge provided by an academic education and the technical competencies required for today’s designs.

To remain successful, training is essential. This is why InnoFour offers a full range of learning solutions developed specifically for electronics designers and engineers.

We also offer on-demand training libraries to boost your knowledge and design productivity.

PCB

View all PCB trainings

Training xDX Schematic Entry

Improve your knowledge and skills with Design Definition, using the xDx Designer tools suite. You will be trained to be more productive with your current flow, whether this is PADS Standard/Plus, PADS Professional or Xpedition Enterprise.

October 09, 2023 - October 10, 2023

Analog Mixed Signal Simulation

This course covers the most important aspects of setting up the Analog Designer tool. It covers setting pointers to models libraries as well as how to develop new libraries and manipulate models.

October 16, 2023 - October 17, 2023

HyperLynx Power Integrity Analysis

The HyperLynx Power Integrity Analysis training will help you understand the basic concepts of power distribution and delivery on a PCB, power integrity simulation, identification of power distribution problems on your PCB, and fixing these problems early in the design cycle.

October 30, 2023 - October 31, 2023

HyperLynx Signal Integrity Analysis

This training will teach you how to use HyperLynx SI to analyze signal integrity, timing, crosstalk and EMI in pre- and post- layout stages of the design process.

November 06, 2023 - November 07, 2023

HyperLynx DRC Workshop

The HyperLynx DRC Workshop is developed to show you all the capabilities of this powerful tool.

November 13, 2023

IOPT FPGA Design Workshop

Experience the benefits of optimizing the FPGA IO in the floorplanner and PCB layout integration for board layout routing improvement.

November 20, 2023

Basic SI using PADS HyperLynx

The HyperLynx Introduction for PADS course provides PADS Professional and PADS Standard Plus users an introduction into High Speed (Signal Integrity) design with the tools they have available today.

November 27, 2023 - November 29, 2023

The CES Fundamentals Tips & Tricks

The CES Fundamentals, Tips & Tricks course is developed to provide a practical guideline through the constrained process of your design.

December 11, 2023

Xpedition xPCB Layout Introduction

Xpedition xPCB Layout Introduction presents the workflow and methods of laying out a printed circuit board using the latest version of Siemens EDA Xpedition xPCB Layout.

On request

PADS Professional Fundamentals

PADS Professional Fundamentals training is a basic introduction to the PADS Professional Flow

On request

Valor NPI Introduction

This training covers the Valor NPI operations for incorporating Design for Manufacturing (DFM) analysis into your PCB design process.

On request

CAM350 Product Training

This training is a great opportunity to learn how to get the most out of your CAM350 and/or DFMStream software.

On request

BluePrint-PCB Product Training

This training covers will emphasize getting to learn the basics of BluePrint-PCB.

On request

FPGA & IC

View all FPGA & IC trainings

ModelSim / Questa Core: HDL Simulation

ModelSim / Questa Core: HDL Simulation teaches you to effectively use ModelSim / Questa Core to verify VHDL, Verilog, SystemVerilog, and mixed HDL designs.

October 10, 2023

Accelerating FPGA and Digital ASIC Design

Efficiency and quality are both a question of overview, readability, extensibility, maintainability, and reuse, - and a good architecture all the way down is the answer. This applies to both Design and Verification

November 13, 2023 - November 16, 2023

Advanced VHDL Verification - Made Simple

Learn the world-wide #1 VHDL Verification Methodology from the creator and main architect of UVVM

November 27, 2023 - December 01, 2023

ModelSim / Questa Core: Advanced Topics

ModelSim / Questa Core: Advanced Topics teaches you to capitalize on the extensive capabilities of ModelSim / Questa Core to effectively and efficiently analyze and debug digital HDL designs.

On request

ALM

View all ALM trainings

Polarion Requirements User Training

This 2-days course will give you a detailed overview on how to use Polarion REQUIREMENTS in your daily work as requirements engineer.

October 09, 2023 - October 10, 2023

Polarion ALM - Power User Training

This 2-days course provides a detailed Administrative training on how to customize Polarion for your organization's needs and processes.

October 30, 2023 - October 31, 2023

Requirements Engineering Foundation

This 3-days Requirements Engineering Foundations will teach you how to work with your stakeholders and users to find requirements, negotiate priorities, manage expectations, check feasibility, write requirements, validate the requirements, deal with change, etc.

On request

Polarion QA User Training

This 2-days training will provide you with a detailed overview on how to use Polarion QA in your daily working environment involving test case management that is unified by design with your entire development process.

On request

The Risk of Words

This 1-day intensive Risk of Words will significantly improve your writing skills by utilizing a series of practical guidelines that will help you construct the best possible functional requirement statements using the right words.

On request

Cabling

View all Cabling trainings

Capital Essentials

This training is designed to equip you with the methods and skills used to create and maintain wire harness drawings and the associated component database.

November 13, 2023 - November 14, 2023

Capital Essentials Harness Design

This training is designed to equip you with the methods and skills used to create and maintain harness drawings and the associated component database.

December 04, 2023 - December 05, 2023