Live Webcast: CAM350 Streams Rule Checking Analysis

28 May 2010

Live Webcast: CAM350 Streams Rule Checking Analysis and Demonstration

 

Overview/What You Will Learn

Discover how Streams Rule Checking can benefit your PCB post processing analysis goals. During this hour seminar we will quickly introduce you to Streams Rule Checking, then demonstrate how it works. Streams RC when used with DFF will decrease the effort and time it normally takes you to run your board analysis, while simplifying the results and enabling quick fixes...

 

Analyzing Gerber Layers in CAM systems often requires difficult setup and verification. Typical CAM software products force you to repeat the setup for each new design that is produced. You may have to run each type of analysis individually...

 

A time consuming task... Until Now!

 

Now with Streams RC you can run Design Rule (DRC), Design for Manufacturing (DFF, DFM) and Netlist Comparison together in one checklist. Create, save, and recall multiple "Streams" based on design technology, and/or manufacturing capabilities. Run differing analysis on High Technology areas such as BGA or Wire Bond, and run standard analysis on the rest of the design, all from one "Stream".

 

You can define as many analysis areas as desired. Errors can be quickly verified by charting the results. You are no longer required to view each individual error. Charting of results allow you to quickly determine what, if any, changes need to be made to the design database. 

 

Who Should Attend

  • Engineers
  • Engineering Managers

Details:

  • What: CAM350 Streams Rule Checking Analysis and Demonstration
  • When: Tuesday 22nd of June 2010
  • Where: Online
  • Time: 20:00 PM CET
  • Duration: 1 hour
  • Registration: Web